лог стирания и прошивки
Код:
User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0A00010A8AB00052E2C0C3EA199757533B0C4650
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
- > Backup check skipped by user
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15
CFL : Reading NPC
IMEI : 357900049485766
CFL : Reading CCC
CFL : Reading HWC
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\357900049485766_CRT_2nd.rpl
CFL: Preparing for erase...
Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01
- > USE "COLD FLASH" option in FlashSetting for revive device by USB!!!
CFL: Erase done
CFL: Close_Session
Content: 000300000000070000000700000000
CFL: Reboot
Phone disconected!
Connect phone on selected interface...
Core : v1.54 , FlashEngine : v2.1
Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-588_51.0.002_prd.core.C00
PPM : RM-588_51.0.002_prd.rofs2.V05
PPM2 : RM-588_51.0.002.525.03_prd.rofs3.fpsx
CNT : RM588_51.0.002_003_U525.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
- > Force ColdFlash mode
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0A00010A8AB00052E2C0C3EA199757533B0C4650
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : Blank (Erased or HW failure)
CFL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing RM-588_51.0.002_prd.core.C00
Partitioning....
Partitioning Ok...
Erasing....
Erasing Data....
Erase area : 0x00040000 - 0x00082FFF , CMT , NAND
Erase area : 0x00083400 - 0x003FFFFF , CMT , NAND
Erase area : 0x00400000 - 0x007FFFFF , CMT , NAND
Erase area : 0x00800000 - 0x00D5FFFF , CMT , NAND
Erase area : 0x00D60000 - 0x09E5FFFF , CMT , NAND
Erase Partition
Partition 0x0A
Erase Ok...
TIME : Erase time : 00:00:01
CFL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
Write : Processing RM-588_51.0.002_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*ENO]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 437 blocks
TIME : Write time : 00:01:37
MCU Write done
CFL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
===Flashing [PPM]===
Erase : Processing RM-588_51.0.002_prd.rofs2.V05
Erasing....
Erasing Data....
Erase area : 0x06FE0000 - 0x0915FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
Write : Processing RM-588_51.0.002_prd.rofs2.V05
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 109 blocks
TIME : Write time : 00:00:24
PPM Write done
CFL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
===Flashing [PPM2]===
Erase : Processing RM-588_51.0.002.525.03_prd.rofs3.fpsx
Erasing....
Erasing Data....
Erase area : 0x09160000 - 0x09E5FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
Write : Processing RM-588_51.0.002.525.03_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 30 blocks
TIME : Write time : 00:00:06
PPM Write done
CFL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
===Flashing [CNT]===
Erase : Processing RM588_51.0.002_003_U525.uda.fpsx
Erasing....
Erasing Data....
Erase area : 0x09E60000 - 0x0F47FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
Write : Processing RM588_51.0.002_003_U525.uda.fpsx
Total writen 175 blocks
TIME : Write time : 00:00:40
CNT Write done
CFL: Request programm status
NAND status : 00000007 / 00000007 / 00000000
CFL: Close_Session
Content: 000300000000070000000700000000
CFL: Reboot
Flashing done!
Total flash time : 00:02:51
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 5230
Software Info: V ICPR72_11w16.1 28-07-11 RM-588 (c) Nokia
IMEI: 12345610654321?
Ape Version: V 51.0.002
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done ;D
Done!
Elapsed: 00:03:08
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
не восстанавливается security
Код:
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0A00010A8AB00052E2C0C3EA199757533B0C4650
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
2nd boot not accepted... Alive Request not done :(
Boot error... :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm
- > If phone is RAPIDO - Use Dead mode for it ;D
Connect phone on selected interface...
Will Write CCC/HWC keys now...
Using : 5230_RM-588_hwc+ccc_www.UO5OQ.com.rpl
CCC Data found!
HWC Data found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0A00010A8AB00052E2C0C3EA199757533B0C4650
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15
CFL: Preparing for write certificates...
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
CFL: Writing Flash certs done! :)
CFL: Close_Session
Content: 000300000000070000000700000000
CFL: Reboot
All done, disconneting...
Done!
Elapsed: 00:00:15
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
и еще лог... не пойму чего еще ему надо))) помогайте пожалуйста меганокиевцы))) ps перекатал авилму FBAS не появился
Код:
Connect phone on selected interface...
Read Uniq key data started...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID: 0A00010A8AB00052E2C0C3EA199757533B0C4650
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
Fetching data, wait...
- > Reinsert cable and battery, press powerOn button again
- > For X7, E7 - just waiting, near 1 minute
- > When BEST start Search Phone - Press PowerOn if needed
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0A00010A8AB00052E2C0C3EA199757533B0C4650
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15
CFL: Close_Session
Content: 000300000000070000000700000000
CFL: Reboot
Wait, reconneting...
rap= 0A00010A8AB00052E2C0C3EA199757533B0C4650
hash= 479C6DDE3942E12C429C1D6ADED80371
key= 0D33ED3FBC5B72CEA7533A6D32C1BB52472CEFE8
Key file updated...
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 357900049485766
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!
Operating mode is OK, no need change...
Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 37 write - Ok
Record 39 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok
Done!
Elapsed: 00:00:09
Reading Phone Info....
Connected phone - Nokia 5230
Software ver : V ICPR72_11w10.1 15-03-11 RM-588 (c) Nokia
IMEI : 357900049485766
Ape Ver : V 50.0.001
APE Var : V 50.0.001V 50.0.001 V 50.0.001
APE ADSP: 256
DSP Ver : ICPR72_10w43
APE Test: eno_version
PPM :
CNT : V 50.0.001 RnD
Product SN : 0
Product code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 16
Tahvo : 22
Batery: 4148 mV
APE HW: 256
Lock info ===========
IMEI : 357900049485766
IMEI spNet : 3A 75 09 00 94 84 75 06
IMEI svNet : 33 75 09 00 94 84 75 26 F3
Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created
SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Ok
Security status : Damaged!!!!!
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
Will Write CCC/HWC keys now...
RM-588.rpl not exist
Select file, please
- > No any file selected, break operation
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Will Write CCC/HWC keys now...
Using : 5230_RM-588_hwc+ccc_www.UO5OQ.com.rpl
CCC Data found!
HWC Data found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0A00010A8AB00052E2C0C3EA199757533B0C4650
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15
CFL: Preparing for write certificates...
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
CFL: Writing Flash certs done! :)
CFL: Close_Session
Content: 000300000000070000000700000000
CFL: Reboot
All done, disconneting...
Done!
Elapsed: 00:00:17
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Сообщение от DJ_TON
