Incredible 2 помогите с флешкой

[BELYI_AKA]

Привет Всем!

Принесли ТА не загружается висит на заставке, все попытки прошить через ЮЗБ и рековери неудачно, пробовал пролить фулл через риф, непрошивает

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Incredible 2 V1.0.0.0]

Connecting to the dead ************...OK
Detected dead ************ ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 5 kHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (M4G2DE, 0x000086800000 Bytes = 2.10 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (M4G2DE, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead ************...
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x00000008D200

Разными скоростями пробовал, ресурект тоже неидет.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Incredible 2 V1.0.0.0]

Connecting to the dead ************...OK
Detected dead ************ ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (M4G2DE, 0x000086800000 Bytes = 2.10 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (M4G2DE, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead ************...
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x00000008D200

Вывод флешка сдохла, пробовал флешку от I900 и 8гб и 16гб, их вообще невидит.
Вопрос возможно другим образом пролить фул на флешку от I900 и запаять на данный ТА?

И тестпоинт непроходит, хотел через юзб пролить фулл.