C3322 извлечь контакты

[Grishanenko]

Телефон моргалик. Внутри чисто.
Как я понял, контакты у него хранятся в tfs.
z3x его вычитывать не умеет, а при чтении eeprom через USB вываливается с ошибкой.

UFS (с резистором 527 кОм) пишет:

AppVers: SAMSUNG TOOLS (HWK) v 2.3.0.5 by SarasSoft  Build 54 
LogFile: .\_!_LOG\*****_2015_01_28_16_31_11_LOG.txt
Loaded Settings from: Sams.ini
 
Connect Cable to Switched Off Mobile (with battery)
Preloader Ok 39, 921600 Baud
2nd Boot Failed: Size

Гугл о такой ошибке, фактически, ничего не знает...

[MOXA]

шил даунлоадером, у меня почему то оставались данные... на сто процентов не дам уверенности, но у меня так было.

[Grishanenko]

Клиент потерялся. Сейчас дал согласие рискнуть и прошить (без tfs). Но вылазит ошибка при инициализации (Err. 108). Вот полный лог:

00'05"016,1244088,MMI,CALL,2,CBfloaderAppDlg::OnButtonStart()
00'05"063,1244088,MMI,HEADER,2,***** SYSTEM INFORMATION ***** 
00'05"079,1244088,MMI,HEADER,2,Computer name:        LEX
00'05"094,1244088,MMI,HEADER,2,User name:            1
00'05"125,1244088,MMI,HEADER,2,Operating System:     Windows_NT
00'05"125,1244088,MMI,HEADER,2,OS Version:           5.1 (Windows XP)
00'05"125,1244088,MMI,HEADER,2,System Drive:         C:
00'05"125,1244088,MMI,HEADER,2,Processor identifier: x86 Family 6 Model 22 Stepping 1, GenuineIntel
00'05"125,1244088,MMI,HEADER,2,Number of Processors: 1
00'05"157,1244088,MMI,HEADER,2,***** FL SETTINGS ***** 
00'05"157,1244088,MMI,HEADER,2,Flashloader version:        7.4.7_SSG_v0.1
00'05"172,1244088,MMI,HEADER,2,Com. Uart Dll version:      UART_1.5.0
00'05"172,1244088,MMI,HEADER,2,Com. Usb Dll version:       USB_RTG_2.5.0
00'05"188,1244088,MMI,HEADER,2,Active Com. Dll version:    USB_RTG_2.5.0
00'05"204,1244088,MMI,HEADER,2,Security Dll version:       1.2.0
00'05"204,1244088,MMI,HEADER,2,FlashDatabase Dll version:  1.0.2
00'05"204,1244088,MMI,HEADER,2,Number of devices:    1
00'05"219,1244088,MMI,HEADER,2,Baseband Proc:        PNX4908
00'05"219,1244088,MMI,HEADER,2,Location:             ExtBus_CS1
00'05"219,1244088,MMI,HEADER,2,Specific location:    NOR Flash
00'05"219,1244088,MMI,HEADER,2,Address:              0x90000000
00'05"219,1244088,MMI,HEADER,2,Selected Commands:    ERASE WRITE EXEC 
00'05"219,1244088,MMI,HEADER,2,Erase Option:         APPLICATION SIZE
00'05"235,1244088,MMI,HEADER,2,Application file:     C:\Phones_temp\C3322\C3322XELF1\pout\C3322OPEN.ptt
00'05"235,1244088,MMI,HEADER,2,***** ADVANCED SETTINGS ***** 
00'05"235,1244088,MMI,HEADER,2,Loader binary file:   External
00'05"235,1244088,MMI,HEADER,2,Loader filename:      C:\Phones_temp\C3322\Flash loader 7.4.7_SSG_v0.1_Lite\PUNCH_pnx4908load_cs2_v03.bin
00'05"250,1244088,MMI,HEADER,2,Loader capability:    UART
00'05"266,1244088,MMI,HEADER,2,Format BBM:           NO
00'05"266,1244088,MMI,HEADER,2,************************** 
00'05"282,1244088,MMI,CALL,2,CBfloaderAppDlg::CreateThread (threadID=0)
00'05"297,1244088,MMI,END CALL,2,CBfloaderAppDlg::CreateThread (threadID=0)
00'05"297,1244088,MMI,END CALL,2,CBfloaderAppDlg::OnButtonStart()
00'47"250,1244088,MMI,CALL,2,CBfloaderAppDlg::OnMemoryDeviceChange ( DBT_DEVICEARRIVAL )
00'47"282,1244088,MMI,MESSAGE FROM WINDOWS,2,WM_DEVICE_CHANGE(DBT_DEVICEARRIVAL), DBCC_NAME:\\?\USB#Vid_04cc&Pid_2257#6&3f3030b&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
00'47"297,1244088,MMI,INFO,2,  DBCC_NAME: \\?\USB#Vid_04cc&Pid_2257#6&3f3030b&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
00'47"313,1244088,MMI,CALL,2,CBfloaderAppDlg::DetectDeviceAndIncrDeviceCount()
00'47"329,1244088,MMI,CALL,2,CBfloaderAppDlg::IsANewDevice (threadID=-1)
00'47"344,1244088,MMI,END CALL,2,CBfloaderAppDlg::IsANewDevice (threadId=-1), Result=1
00'47"360,1244088,MMI,CALL,2,CBfloaderAppDlg::IsNewDeviceCorrect()
00'47"485,1244088,MMI,INFO,2,    INSTANCE_ID	: USB#VID_04CC&PID_2257#6&3F3030B&0&3
00'47"485,1244088,MMI,INFO,2,    dbcc_name	: USB#VID_04CC&PID_2257#6&3F3030B&0&3
00'47"516,1244088,MMI,INFO,2,  PROPERTIES:
00'47"516,1244088,MMI,INFO,2,    SPDRP_CLASS 	USB
00'47"516,1244088,MMI,INFO,2,    SPDRP_SERVICE 	ggsemc
00'47"547,1244088,MMI,INFO,2,    SPDRP_MFG 	Sony Ericsson Mobile Communications
00'47"547,1244088,MMI,INFO,2,    SPDRP_DEVICEDESC 	PNX4910 DFU Device
00'47"563,1244088,MMI,INFO,2,    SPDRP_HARDWAREID 	USB\Vid_04cc&Pid_2257&Rev_0100
00'47"579,1244088,MMI,INFO,2,    SPDRP_CLASSGUID 	{36FC9E60-C465-11CF-8056-444553540000}
00'47"579,1244088,MMI,INFO,2,    SPDRP_DRIVER 	{36FC9E60-C465-11CF-8056-444553540000}\0393
00'47"610,1244088,MMI,INFO,2,    SPDRP_LOCATION_INFORMATION 	ST-Ericsson - Full Speed - DFU
00'47"610,1244088,MMI,INFO,2,    SPDRP_PHYSICAL_DEVICE_OBJECT_NAME \Device\USBPDO-10
00'47"625,1244088,MMI,INFO,2,  END PROPERTIES
00'47"625,1244088,MMI,INFO,2,  Port Nb: 3
00'47"625,1244088,MMI,END CALL,2,CBfloaderAppDlg::IsNewDeviceCorrect(), Result=1 
00'47"625,1244088,MMI,CALL,2,CBfloaderAppDlg::StartSequencer (threadID=0)
00'47"641,0,APPLI,MESSAGE FROM MMI,2,BFLOADERAPP_MMITOTHREAD_START
00'47"641,0,APPLI,CALL,2,CSequencer::SequencerFsm ( BFLOADERAPP_MMITOTHREAD_START )
00'47"657,1244088,MMI,MMI FSM STATE,2,STARTED,SequencerId:0
00'47"657,0,APPLI,FSM STATE,2,SEQ_STARTED
00'47"657,0,APPLI,END CALL,2,CSequencer::SequencerFsm(), Result=1
00'47"657,1244088,MMI,END CALL,2,CBfloaderAppDlg::StartSequencer (threadID=0)
00'47"657,1244088,MMI,MMI FSM STATE,2,BR_CONNECTED,SequencerId:0
00'47"657,1244088,MMI,END CALL,2,CBfloaderAppDlg::DetectDeviceAndIncrDeviceCount(), Result=1
00'47"672,0,APPLI,MESSAGE FROM MMI,2,BFLOADERAPP_MMITOTHREAD_EXEC_BR_CMD
00'47"672,1244088,MMI,END CALL,2,CBfloaderAppDlg::OnMemoryDeviceChange, Result=1
00'47"672,0,APPLI,CALL,2,CSequencer::SequencerFsm ( BFLOADERAPP_MMITOTHREAD_EXEC_BR_CMD )
00'47"672,0,APPLI,CALL,2,CSequencer::InitSeq ()
00'47"672,0,MMI,INFO,1,Waiting for board reset
00'47"688,0,MMI,INFO,1,Device connected to port: 3
00'47"704,0,APPLI,CALL,2,CSequencer::ManageError(), ErrorId=108, Msg=Error during Communication initialization (in InitSeq)
00'47"704,0,APPLI,FSM STATE,2,SEQ_FINISH
00'47"704,0,APPLI,CALL,2,CSequencer::CloseSeq()
00'47"704,0,APPLI,END CALL,2,CSequencer::CloseSeq(), threadID=0
00'48"704,1244088,MMI,MMI FSM STATE,2,SEQ_ERROR,SequencerId:0
00'48"704,1244088,MMI,MMI FSM STATE,2,FINISH,SequencerId:0
00'48"735,1244088,MMI,CALL,2,CBfloaderAppDlg::FreeThread (threadID=0; terminationState=4)
00'48"750,1244088,MMI,INFO,2,ERROR message received from sequencer
00'48"766,1244088,MMI,CALL,2,CBfloaderAppDlg::ReleaseMemory (threadID=0)
00'48"797,1244088,MMI,END CALL,2,CBfloaderAppDlg::ReleaseMemory (threadID=0)
00'48"797,1244088,MMI,MMI FSM STATE,2,FREE,SequencerId:0
00'48"797,1244088,MMI,END CALL,2,CBfloaderAppDlg::FreeThread (threadId=0; terminationState=4)
00'48"797,0,APPLI,INFO,2,FATAL ERROR RECEIVED 
00'48"813,0,APPLI,END CALL,2,CSequencer::SequencerFsm(), Result=1
00'49"625,1244088,MMI,CALL,2,CBfloaderAppDlg::OnMemoryDeviceChange ( DBT_DEVICEREMOVECOMPLETE )
00'49"657,1244088,MMI,INFO,2,  DBCC_NAME: \\?\USB#Vid_04cc&Pid_2257#6&3f3030b&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
00'49"672,1244088,MMI,MESSAGE FROM WINDOWS,2,WM_DEVICE_CHANGE(DBT_DEVICEREMOVECOMPLETE), SequencerId:-1
00'49"672,1244088,MMI,INFO,2,    ThreadID == -1 in CBfloaderAppDlg::OnMemoryDeviceChange
00'49"719,1244088,MMI,END CALL,2,CBfloaderAppDlg::OnMemoryDeviceChange, Result=0
00'55"516,1244088,MMI,CALL,2,CBfloaderAppDlg::OnButtonStart()
00'00"031,1244088,MMI,INFO,2,STOP pressed before completion
00'00"031,1244088,MMI,CALL,2,CBfloaderAppDlg::StopSequencer (threadID=0)
00'00"031,1244088,MMI,END CALL,2,CBfloaderAppDlg::StopSequencer (threadID=0)
00'00"047,1244088,MMI,END CALL,2,CBfloaderAppDlg::OnButtonStart()