Сообщение от
densmen
Тоже самое. почему то я не удивлен
только что снял флайм meizu m5s выбрав мейзу А5
Код:
Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM27
>>> Device driver identification:
MediaTek PreLoader USB VCOM (Android)
>>> Mobile Has Connect...
CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Success
The Flash Hardware Info:GE6BMB
>>> Downloading Boot2 To Mobile Phone...Success
=====================Flash Type(eMMC)==============
Flash Size: 0x00000003A3E00000 -> 14910M
Flash ID: 0x150100474536424D
Flash Name: Samsung_Unknow
Flash symbol: GE6BMB
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM31
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>> Analysis of mobile phone data...
>>>>Reading Mobile Org Info....
Success
>>>>Moving Mobile Info...
This Phone Support CDMA
SN has Change to :612C\Z116K02
This Phone Support CDMA
SN has Change to :028185 SN has Change to :028185>>>>Formating Mobile USER Data...
ADD(HEX):0x00B6000000 Size(HEX):0x02ECD80000
Corresponding operation completed!!!
After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!