Внимание. Вышел новый феникс.

[cnapkc]

Вышел новый феникс. Текущая версия phoenix_service_sw_2005_20_7_98

[cnapkc]

Изменения в новой версии


- Support for RH-73, RH-74, RM-56, RM-67, RM-78, RM-79, RM-82, RM-83, RM-84, RM-89, RM-97, RM-99, RM-115, RM-126 and SU-18

- New FLS-4S Driver v 2.07

- New Flash Update Package v 3.29.002

- RF loss table for autotuning updated for new products.

- RF AGC Status window can be used for CDMA phones RM-41 and RM-66.

- Camera control UI has been improved.

- Auto focus testing in camera control UI for RM-42 has been added.

- Transferred image from RM-76 is now deleted.

- Support for 32bit display types is added.

- Display test component shows clear error message for not supported display types.

- If SW-content in BB5 phone for a different product code will be flashed, also the product code will be updated (Swap concept).

- “Full factory set” will be run before flashing for RAE-2, RAE-6 and RAE-4.

- New phone setting for “MMS postcard destination address” can be handled.

- “User Profile save and restore” component is improved.

- GSM autotune function “TX IQ self tuning” and “RX AM Suppression” is improved.

- Autotune start error with Willtek 4400 / Firmware 5.x is corrected

- Misleading “GPIB address field” is removed from

- Menu for RM-43 is changed. “Warranty Information”, “Memory Card Test” and “Ambient Light Sensor Calibration” is removed.

- ************ certificates for RM-19 will be restored after refurbishment.

- “ESN Reconstruction” is renamed to “IMEI/ESN rebuild” for all protocols.

- “File System Format” menu is added for RM-74 and RM-75.

- “TX Power Level Tuning” for RM-74, RM-75 is improved.

- “Phone Information” function is improved.

- “RX Calibartion” menu is improved.

- “Camera Control” now works with NHL-4JX and RH-30

- “Phoenbook” window for CDMA phones can be resized now.

- When a CDMA product is closed then the user is prompted to save or not the PRI or OSA file.

- CDMA flashing with FPS-4S and FPS-8 is improved.

- CDMA flashing error “Failed to restore NAM” is fixed.

- RM-69 display tune works now.

- RH-51 flashing with FLS-4S is working.

- Help for FPS-11 flashing is updated and available with F1

- FPS-11 flashing with slower CPU's for CDMA-flashing and user settings save/load is limited for 4 ports at the same time

- FPS-11 flashing problem with user settings is solved.

- Bigger file sizes are supported now by FPS-11 flashing.

- RX Calibration for RM-58 is improved.

- RX calibration window shows AFC values.

- Phoenix doesn't stuck anymore after closing the connection several times

[Jurik_G]

И опять криво работает с 9300 и 9500.

[к.Немо]

А взять-то где ???

[shurass]

Автор оригинала к.Немо
А взять-то где ???

как это где??? там где и всегда...
https://europe.partners.nokia.com

[к.Немо]

Те у кого есть пароль и логин и без сообщений в форуме знают, что вышел новый феникс. А когда нет доступа к ресурсу?

[L()R[)]

Ну и нафига он тебе? У тебя что ли есть донгл??? У меня есть на дисках (полная копия оригинальных от нокиа)... Но он не ставится без донгла Там интерес только прошивки и сервис-мануалы

[InterLooper]

L()R[)
У меня есть. А доступа нету.
Народ, выложите свеженькую, а?

[L()R[)]

А где же купить мне донгл, хочу с оригинальным фениксом работать :-) Где и как? А главное за сколько?

[Ruslan]

InterLooper
На суппорте JAF и Twister воляеться phoenix_service_sw_2005_20_7_98

[InterLooper]

Ruslan
Мндя. Так оно и есть. Спасибо. Бывает

[AAAXXXZZZ]

посмотрите здесь
http://rapidshare.de/users/82T7CU