два вопроса:
1. есть ли где-то прошивка?
2. сеть из-за этого не видит? или моей вины нет?
два вопроса:
1. есть ли где-то прошивка?
2. сеть из-за этого не видит? или моей вины нет?
какие все отзывчивые...
ссылки по этому вопросу:
http://www.cellular-support.com/show...highlight=t616
http://www.mobile-files.ru/forum/sho...highlight=t616
цитата из первой ссылки:
After all of the testing that I've made with the Terminator Dongle that I received 2 days ago, I've compile the following for the so called successful conversion.
HOWEVER, DO THIS ONLY IF YOU WILL HAVE THE CABLE HANDY, OTHERWISE YOU MAY HAVE SOME TROUBLE REVERTING OR FIXING POSSIBLE DEFECTS
When I say so called successful conversion, what I mean is that you can have your band 1800/1900 working but not the band 850/900 after this conversion. The reason is because the T616's hardware is for 850 and T610's firmware is designed to work with 900. So if you think about the logic, that explains why only 1800/1900 will work.
For why I'm converting from T616 to T610, is because I would like to have Chinese support on my T616 (well, I didn't know that it doesn't support Chinese when I bought it). Anyways, if you don't need 850 band, like FIDO only uses 1900, then continue to read. And most Service Provider in HK uses either 1800 or otherwise 900/1800, then with the single band 1800, you will still be able to use T616 in those area. Just that you will loose advantage of Service Provider that supports 850.
Enough of the Gas... here is how I convert it:
1) Load the Userport software came with the DIV USB 3.1
2) Load the DIV USB 3.1 900/1800/1900
3) Download the Main Flash, and the Modem Flash for the language you want, for example, in my case (R4C003-Hong kong.sbn and R4C003-Hong kong.avr), this have to be matched
4) Download the GDFS from merwin's site (http://merwin.cellular-support.com/gdfs) and download the Acoustic V3 for T610
5) Flash the AVR and SBN using the DIV USB 3.1
6) Write the GDFS File (acoustic v.3 for T610)
7) Remake CRC (<-- thanks for eason_c to mention this new step)
8) Rebuild SP Area using OTP IMEI
And there should be your workable T616 with T610 firmware. You probably are thinking if there are any other defects of doing so? The only thing you will loose is the 850band for (T616 -> T610) or 900band for (T610 -> T616)
As for the unbranding business, you can download the T610_original_GDFS file from the download area and use the Function as step # 6 above to write it. It'll help you to remove all the customed branded stuff.
ссылка в цитате битая. помогите найти необходимые файлы или кинье на мыло.
[email protected]
если ты его делал через UFS то тогда просто сделай ему Restore SA и залей тот файл что автоматом сохранился, и будет тебе счастье :)Сообщение от eMAN
Сообщение от NightMan
лил через UFS. а где бэкап должен был оказаться? просто я далеко от того компьютера
песдец. ты поиском пробовал пользоваться??
http://www.mobile-files.ru/forum/sho...highlight=t616
да, блин. пробовал!Сообщение от Leper Messiah
КАК делать я и сам нашел. ті мне скажи ЧЕМ! файлов нету
Тебе нада
T610_Original_GDFS_area.gdf
t610_r4c003_emea1.sbn
t610_r4c003_modem.arm
эти файлы? Если да - то выложу.
Вот этим я делал. Получалось.
Последний раз редактировалось ALEX_SW; 18.09.2006 в 17:42.
респект, друг! если оживлю, то с меня магарыч!!! :DСообщение от ALEX_SW
блин. DIV для LPT-кабеля? у меня такого нема :(Сообщение от ALEX_SW
может для UFS что-то подойдет? (файлы прошивки обзывает corruped or patched). или хоть на ЮСБ, тогда завтра смогу сделать
semctool работает с УФС и прочей шьющей соньэрики железой и кабелей.
div2ufs - конвертит файлы с дива в уфс формат.
Sony-Ericsson Div Usb - это под див юсб.
Попробуй, семтул, он этот формат хавает, но шьет через уфс и кабеля.
Последний раз редактировалось ALEX_SW; 18.09.2006 в 17:42.