Страница 9 из 28 ПерваяПервая 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ... ПоследняяПоследняя
Показано с 97 по 108 из 326

Тема: RIFF Box JTAG - обновления, новости сервера

  1. #97
    Senior Member Аватар для oriforif
    Регистрация
    21.12.2005
    Адрес
    Россия, Оренбург
    Сообщений
    1,157
    Спасибо
    765
    Благодарностей: 157 : 97

    24.04.2013 RIFF JTAG - RIFF JTAG Manager v1.49, RIFF Box Firmware v1.35 released (Cortex-A15, Cortex

    Whats new:


    RIFF Box Firmware v1.35
    Added support for Cortex-A15 and Cortex-A5 cores.
    Fixed emergency script issue for multi-cored Cortex MCUs: it was executed after first core was halted.
    Now it is executed after all core(s) (if specified by reset strategy) are processed (halted).

    RIFF JTAG Manager v1.49
    Added support for Cortex-A15 and Cortex-A5 cores.
    New Popup balloon is added with hints about 'Dead ************ ID is wrong' error.
    Added Windows 8 support.
    Added "RIFFBOX on the Network" button (BOX Service Page).
    User can easily visit some main RIFFBOX's internet locations.
    Some new IDCODES added to the search engine (CTRL+F)

  2. 2 участника(ов) поблагодарили oriforif за его сообщение:

    asg-gealt (26.04.2013), ремсотник (04.06.2013)

  3. #98
    Newbie
    Регистрация
    10.03.2011
    Сообщений
    17
    Спасибо
    5
    Благодарностей: 7 : 5
    Цитата Сообщение от maroon ceprg Посмотреть сообщение
    вот test point для ATF
    Это не JTAG :-) JTAG это не eMMC

  4. #99
    Mega Member
    Регистрация
    21.04.2007
    Адрес
    11 RUS
    Сообщений
    1,209
    Спасибо
    63
    Благодарностей: 257 : 150

    RIFF JTAG – HTC One LTE 32GB (HTC M7) Unbrick, Unlock, IMEI and SuperCID supported

    27.06.2013 RIFF JTAG – HTC One LTE 32GB (HTC M7) Unbrick, Unlock, IMEI and SuperCID supported

    Repairing bricked HTC OneM7 (PN0710000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
    In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
    Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.44.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PN0710000’.


    To resurrect HTC OneS:
    Solder JTAG cable to HTC OneM7 (PN0710000) JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure HTC OneM7 (PN0710000) is selected in the list of models;
    If you use battery, press Power On key;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;
    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
    To enter download mode:
    Disconnect PC cable;
    Insert battery;
    Hold ‘Volume Down’ key and press ‘Power ON’ button.

    Ссылка

  5. Спасибо сказали:

    asg-gealt (30.06.2013)

  6. #100
    Elite Member
    Регистрация
    25.06.2005
    Адрес
    Ашхабад
    Сообщений
    5,052
    Спасибо
    371
    Благодарностей: 2,492 : 962
    RIFF-JTAG--RIFFJTAG Manager v1.50 released

    ---Firmware update procedure is simplified now. To update box firmware
    user now has to click single button, no other actions are required!!!
    (in previous versions update firmware opration caused many questions from unexperienced users).

    --- Update server moved to new host. Thus, Check Updates for Updates button will now work correctly.

    --- Numlock key recognition is added so now additional keypad can be used
    to enter digits 0..9 into decimal fields (like address/length fields)



    RIFF Box JTAG Manager software setup

  7. 3 участника(ов) поблагодарили Mihail_tm за его сообщение:

    asg-gealt (03.08.2013), azis29 (04.08.2013), ремсотник (03.08.2013)

  8. #101
    Member
    Регистрация
    19.09.2004
    Адрес
    Украина
    Сообщений
    401
    Спасибо
    52
    Благодарностей: 23 : 21
    обновление

    16 new models today :

    Samsung GT-S7572 Galaxy Trend Duos II
    Samsung GT-N7005 Galaxy Note LTE
    Samsung GT-i9205 Galaxy Mega 6.3 LTE 8GB
    Samsung GT-i9158 Galaxy Mega 5.8
    Samsung GT-i9152 Galaxy Mega 5.8
    Samsung GT-i8552 Galaxy Win Duos / Galaxy Grand Quattro
    Verizon Samsung SCH-i545 Galaxy S4 (Samsung Altius)
    Samsung SGH-i337M Galaxy S 4 LTE 32GB (Samsung Altius)
    Pantech Vega No6 IM-A860S
    Pantech Vega LTE M IM-A810S SKY
    Pantech Vega IM-A650S
    LG F260S Optimus LTE III
    LG E975 Optimus G (LG Gee)
    LG E960 Nexus 4 (LG Mako)
    LG E970 Optimus G (LG Gee)
    Huawei Ascend G510

  9. Спасибо сказали:

    asg-gealt (10.08.2013)

  10. #102
    Member
    Регистрация
    19.09.2004
    Адрес
    Украина
    Сообщений
    401
    Спасибо
    52
    Благодарностей: 23 : 21
    на черном форуме появилась инфа по обновлению
    http://forum.gsmhosting.com/vbb/f634...-36-a-1698717/

  11. #103
    Junior Member
    Регистрация
    01.09.2009
    Адрес
    Belarus
    Сообщений
    80
    Спасибо
    60
    Благодарностей: 35 : 22
    Свежая инфа с чёрного
    http://forum.gsmhosting.com/vbb/f634...7/#post9642246

  12. #104
    Member Аватар для ildaris2k3
    Регистрация
    22.02.2004
    Адрес
    Ульяновск
    Сообщений
    282
    Спасибо
    73
    Благодарностей: 121 : 91
    Цитата Сообщение от tarik316 Посмотреть сообщение
    Я проапдейтился на 1.51. В обновлениях появилась версия 1.50. Её скачал, запустил - потребовал регистрацию. Зарегистрировался. Снова зашёл в обновления, снова скачал 1.51, запустил, попросила обновление прошивки, ввёл логин, пароль - обновил прошивку бокса до 1.37. Жаль тела нет под рукой проверить в работе.
    В строке под "JTAG TCK speed" заместо RTCK надо поставить любую частоту. Нажать на вкладке "JTAG Read/Write" кнопу "Analyze JTAG Chain"
    1. все плохо
    Connecting to the target...ERROR
    ERROR: Wrong response from the RIFF Box
    2. все замечательно
    Connecting to the target...ERROR
    Set I/O Voltage reads as 2.60V, TCK Frequency is 100 kHz

    None is detected.

  13. 9 участника(ов) поблагодарили ildaris2k3 за его сообщение:

    destyni (26.08.2013), DJ_TON (23.08.2013), HARDMEN (06.09.2013), Nimnul1979 (24.08.2013), renat_d (24.08.2013), sergoss (27.08.2013), Serёgy (24.08.2013), Shamsudin (25.08.2013), tarik316 (23.08.2013)

  14. #105
    Member Аватар для Nicolayer
    Регистрация
    20.12.2003
    Адрес
    Almaty
    Сообщений
    313
    Спасибо
    84
    Благодарностей: 173 : 92
    Обновление DLL в версии JTAG Manager 1.51

    модели добавлены:
    - Samsung SGH-N055/SC-04E,
    - Huawei U173-u2,
    - Samsung SHW-M250s,
    поправленные dll:
    - Samsung i545,
    - Samsung i337.

    источник, подробности

  15. Спасибо сказали:

    ZArchi (01.09.2013)

  16. #106
    Mega Member
    Регистрация
    21.04.2007
    Адрес
    11 RUS
    Сообщений
    1,209
    Спасибо
    63
    Благодарностей: 257 : 150

    RIFF Update Server Instructions

    Ссылка на пост legija

    Hello dear RIFF Box users !

    Here You can read important instructions related to RIFF Update server, RIFF Box registration and troubleshooting.

    First few very important warnings:

    DO NOT run or download any software which is not at official RIFF JTAG Box page ( RIFF Box ? Best JTAG Box in this Galaxy )
    DO NOT post RIFF Box PCB photos, RIFF Box Serial Number or any screenshots on public forums. This is allowed ONLY in Support Tickets section.
    If it's possible, always use Windows 7 to update RIFF Box firmware

    Now, please follow below listed instructions to update Your RIFF Box Firmware and download Your license file:

    Download latest RIFF Setup file from here : RIFF Setup , and execute it.
    Start RIFF JTAG Manager and simply follow instructions from software:
    If Your box is not registered, click "Connect Server":
    .

    .
    Enter Your desired login (user name) password and e-mail address. It's best if You have Gmail account !
    .

    .
    Confirm Your password and e-mail address:
    .

    .
    If You have done everything properly, You'll have following screen:
    .


    This means that Your box is registered ok, and license file is downloaded to Your PC. Now You can proceed to update RIFF Box Firmware.
    Click "Firmware Update" and enter login/password:
    .

    .
    New Firmware will be downloaded and Your RIFF Box will be updated.
    Take note - If You use Windows XP, You may need to re-connect USB Cable on RIFF Box, in order to finish the update properly !
    Now Your RIFF Box is registered, and You can continue using it.

  17. Спасибо сказали:

    Nicolayer (09.09.2013)

  18. #107
    Mega Member
    Регистрация
    21.04.2007
    Адрес
    11 RUS
    Сообщений
    1,209
    Спасибо
    63
    Благодарностей: 257 : 150

    RIFF Box Verification - Important ! ! !

    Hello dear RIFF Box users !

    Just one important announcement for RIFF Box users:

    We've extended verification period for few more days. We'll accept new verification requests by the Sunday, September 15th this year.

    You can read Your RIFF Box Serial Number with old version of JTAG Manager.

    After this time, Support Ticket section will be closed for new requests.
    Remember, only small number of RIFF Box users, with original box, may be requested to verify their box.
    If You get such response from server - Your box is most probably clone, so You better don't waste both mine and Yours time by opening tickets.

    I will not comment this decision anymore, nor discuss it with anyone, or anytime.

    Please take Your time and visit these links, to get required information:

    Legija's Unlock Forum
    How to open support ticket
    RIFF Box Support, Warranty and Repair information !

    Thank You.
    Оригинал

  19. #108
    Mega Member
    Регистрация
    21.04.2007
    Адрес
    11 RUS
    Сообщений
    1,209
    Спасибо
    63
    Благодарностей: 257 : 150
    by admin on Sep.23, 2013, under News

    Great news for all owners of unauthorized RIFF Box hardware !
    We just decided to offer License Activation, which will enable all unauthorized users to use full set of original RIFF Box features !
    With this activation You can:
    Register RIFF Box and receive license file;
    Update RIFF Box Firmware;
    Repair “RTCK Signal Does not respond”;
    Access RIFF files download servers;
    Receive support on RIFF forums;
    Receive and use all future updates;
    This service is available trough Mr Softmobile, well known and trustable person in GSM world.
    Please visit www.softmobile.net to order License Activation Server credits.
    This service is mainly intended for dealers with 10+ quantity of unauthorized RIFF Box hardware.
    If You’re end user with just one box, please contact nearest authorized RIFF Box dealer for details.

    Источник

Похожие темы

  1. У кого RIFF Box JTAG отзовитесь
    от Akir1 в разделе RIFF Box
    Ответов: 53
    Последний ответ: 14.12.2012, 12:24
  2. RIFF Box JTAG или ORT JTAG?
    от nav2000 в разделе RIFF Box
    Ответов: 6
    Последний ответ: 02.12.2010, 14:16

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru